FERRARI - 360 Challenge - Lexan Polycarbonate rear screen

FERRARI 360 Challenge - Lexan Polycarbonate rear screen

Motorsport lightweight Lexan / Makrolon polycarbonate rear window with seperate bolt on oil cooler vent or ventalation slots cut into the panel

We have produced this screen in 2 parts to remove the stress cracking which occurs with OEM factory screens

Manufactured from high quality Polycarbonate sheet
UV protected against sunlight discolouring
Approximately 50% weight saving compared to glass of the same thickness
Each window is marked to meet MSA, FIA & ABG regulations.
Accurately moulded* to the curvature of the OEM glass for a perfect fit
CNC profile cut and ready to fit
Tinted Polycarbonates are self-coloured throughout the sheet.

Whats in the box?

Thermoformed polycarbonate rear window with bolt on oil cooler vent

Custom made for you

All our products are manufactured in the UK by Plastics 4 Performance and are custom made to your requirements.

Worldwide Shipping

We ship our Lexan polycarbonate windows worldwide, fully insured, and direct to your door with DHL.

Why Buy from Plastics 4 Performance?

Feel safe knowing you are purchasing your Lexan Polycarbonate windows from a family-owned business with over 20 years continual history, we manufacture everything in house from the best materials by the best craftsmen and machinery.

''You can tell a lot about a company by the people they supply to - and at Plastics 4 Performance we supply to the best''

Specifications

More Information
Window Type	Rear Screen
Brand	FERRARI
Model	360 Challenge

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

F.A.Q's

WHICH THICKNESS SHOULD I CHOOSE?

3mm - our lightest and most flexible choice. It is a good choice for when you are bonding or bolting windows into the car like the rear screen and rear quarter windows, or if you are going to permanently fix the door windows into the doors.

4mm - the best all-round thickness choice. 4mm gives you good weight savings and also remains fairly rigid so you can use it for any bonded or bolted in windows or windows fitted into rubber seals as well as the majority of door windows.

5mm - thick and heavy duty windows. We usually would use 5mm on frameless door windows or for some vintage race cars with big curved rear screens.

More information can be found here.

ARE your windows curved and PRE-CUT TO FIT?

Yes, all of our windows are trimmed to the size of the stock windows. However, there are a few exceptions where we deliberately make the windows a little bigger in order to fit where body trims are bonded to the glass, but we can not add them to the polycarbonate.

All of our windows are also pre-curved to the curvature of the original glass.

Can I use the original window mechanism?

Yes, as all of our windows are direct OEM window replacements, you can wind our windows up and down. We highly recommend you choose our hardcoating option if you intend to use the original winder mechanism, otherwise your window will scratch with immediate use. Please also ensure any rubber seals are free of grit/ debris or these will also scratch your windows.

Do your windows come with black borders?

Yes, if your OEM windows came with black borders from factory then your polycarbonate windows will come with black borders pre-applied. We will even add a dot matrix if the original glass had one.

How do I fit my Lexan Polycarbonate windows?

We have written guidelines for fitting your windows, which you can find here.

Do not be tempted to use any glues or primers that are designed to bond glass windows into cars. These primers and cleaners are too aggressive for polycarbonate, and the typical glass adhesive does not allow for expansion in the polycarbonate. These will damage your windows.

Are your windows FIA/ MSA approved?

The FIA/ MSA or other regulatory bodies do not actually ‘approve’ any manufacturers' windows. The FIA / MSA publish a set of requirements that windows must be made to, and this usually involves using a recognised shatterproof material of a certain thickness and permanently marked to indicate this.

All of our Polycarbonate products meet all the current material specifications for construction from a shatterproof plastic, and we can provide thickness’s to suit the required regulations. Our windows are permanently marked with the appropriate material specifications and ID numbers required.

Adhesive & Polish

We offer our Polybond-PC Polycarbonate window adhesive and our PolyPolish Care Kit for use with your windows. Here you can find more information about them.

PolyBond-PC - Polycarbonate Window Adhesive
		Our very own formulated adhesive suitable for the bonding in of Lexan / Makrolon pre-primed polycarbonate windows. Used for all windows that bond directly to the body of the car. If you are bolting/ rivetting your windows into place this is not necessary. Can be used on Windshields, rear & side windows. Highly elastic to allow expansion and vibration of the polycarbonate. Solvent & isocyanate free. No need to use any additional windscreen activator/ primers. Made in the United Kingdom.

PolyPolish Window Polish Kit
		Plastics 4 Performance developed PolyPolish Polycarbonate window Polish and Cleaner kit includes a thick acrylic based polish with UV protection. Easily applied to your windows after installation and removal of the protective covering, this polish will seal the surface providing a static free window which does not let dust and grit stick. It also improves the water dissapation helping to keep your windows clearer in the rain. It will also fill micro scratches and generally freshen up old windows. Made from a unique blend of waxes, anti-static agents and hydrophobic sealants to help protect your windows after installation or a deep wash. Developed and used daily in our own workshop, this is the best polish you can use for your polycarbonate windows. Also included is a trackside cleaner, which is a combination cleaner and polish so you can easily look after your windows at the track side.